Springtime in Houston can be surprisingly pleasant. Trees and flowers are coming back to life, hummingbirds are arriving on their spring migration, and any monarch butterflies that did not overwinter in the area are returning from Mexico. The scorching summer heat has yet to arrive, the hours of sunlight are more bountiful, and the humidity is often just a little bit less than it is between late autumn and winter. Spring is an ideal time for Houston asphalt sealcoating, but it has nothing to do with enjoying the flora, hummingbirds, or monarchs.

Why Is Spring Ideal for Houston Asphalt Sealcoating?

Asphalt sealcoating in Houston can frequently be problematic. Asphalt sealcoating companies that manufacture the sealant that your contractor will use formulate their products to be applied under specific weather conditions. In the Houston area, spring offers the best combination of weather conditions for an asphalt sealcoating company to achieve high-quality results.

What Conditions Are Needed for High-Quality Houston Asphalt Sealcoating?

It is important to understand that sealcoating manufacturers specify ideal conditions as well as acceptable conditions.

1. Ground and Air Temperature: Local Houston asphalt sealcoating contractors know that sealants should not be applied when temperatures are less than 50 degrees Fahrenheit. Depending on other weather conditions, the temperature may need to be several degrees higher. Once summer arrives with its scorching heat, asphalt sealcoating contractors must frequently take steps to prevent the sealant from drying too quickly. The ideal temperature is 70 degrees Fahrenheit, and spring is the season in which the ideal can often be found.
2. Relative Humidity: Every parking lot asphalt sealcoating contractor or worker who has been outdoors in the area knows how humid it can get. The ideal humidity is less than 50%, but those levels are virtually never found in the Houston area. Once the relative humidity exceeds 90%, asphalt sealcoating companies should not attempt to apply a sealant. Springtime humidity levels are no worse in Houston than in other seasons, and they are often just a little bit lower.
3. Wind: Sealcoating needs a light, steady breeze to stir the air above the pavement while the sealant cures. Unless there is a tropical storm or hurricane parked offshore, wind speeds are rarely too high for sealcoating. However, they can sometimes be too low. The more saturated the air, the longer it takes for the sealant to cure. A wind velocity of around 3 mph is ideal for asphalt sealcoating in Houston, but contractors can deal with wind speeds more than three times the ideal. Acceptable wind conditions can often be found in any season, but they are more common in the spring.
4. Sunshine: You may have heard that sunlight robs asphalt pavement of its color and moisture. Although this is true, ironically, parking lot asphalt sealcoating needs at least four hours of sunlight to cure properly. Sunshine is abundant during the spring. This is due to the length of the days, but spring, especially the months of April and May, tend to have fewer rainy days with a cloud cover that can block the sunlight.

What Are Some Other Things I Should Know About Houston Asphalt Sealcoating?

There are a few things that asphalt sealcoating contractors would like their customers to know.

1. Asphalt sealcoating companies cannot control the weather. During any season, a contractor may need to reschedule if the weather decides to be uncooperative.
2. Summer can be especially hard on asphalt pavements in Houston. Sealcoating in the spring gives your pavement the protection it needs to resist damage later in the year.
3. The success of your sealcoating project depends on the skills, experience, and integrity of the contractor you hire. Take the time to hire the best contractor you can find.
4. Parking lot asphalt sealcoating can provide several benefits. These include enhancing traction, boosting curb appeal, and making the surface more attractive.
5. If your asphalt pavement has turned an ugly gray or brown, sealcoating can usually restore it to its luxurious, dark original color.
6. You will need to repaint your parking lot markings and line striping after sealcoating. Sealcoating will obscure painted markings, rendering them useless. Many asphalt sealcoating companies offer striping and marking services, and this can make the process more efficient.

When you want the best Houston asphalt sealcoating, call Marathon Solutions Group. We also offer parking lot striping, crack repairs, asphalt repairs, asphalt resurfacing, parking lot maintenance plans, asphalt milling, asphalt paving, thermoplastic markings, bollard and traffic sign installations, and marking removal. In addition, we install concrete ramps, concrete parking lots, concrete sidewalks, ADA-compliant concrete, and concrete curbs, and we offer concrete repairs as well. We have an impeccable reputation for exceptional craftsmanship and exemplary service. To receive a free quote with no strings attached, complete our online request form, email Sales@Marathon-Solutions.com, or call our office at 800-879-1147.